BidCraft Tile
BidCraftTile
← What's new
2026-06-22

Upload a floor plan, and rooms that name themselves

There's a new Floor Plan block at the top of Inputs — drop in an image or PDF and BidCraft pulls the printed dimensions right off it. And rooms now name themselves from the AI read, so "Room 1 / Room 2" becomes "Master Bathroom / Kitchen."

Upload a floor plan, and rooms that name themselves

Two things that take guesswork out of a project: feed BidCraft a real floor plan and it reads the measurements off it, and stop staring at a list of "Room 1, Room 2, Room 3" because the rooms now name themselves.

Snap or upload a floor plan

There's a new Floor Plan block sitting at the top of the Inputs section. Got a plan from the homeowner, the architect, or the builder? Drop it in. Sketched your own with measurements on it? That works too.

It takes an image or a PDF, up to 20MB. After you upload, you can add a short instruction note — something like "master bath is top-right, ignore the garage" — and BidCraft reads it and focuses on the part that matters. Hit Analyze on the plan and it reads the whole sheet: the printed room labels and the printed dimensions, then feeds those numbers straight into your measurements. One plan can cover several rooms in a single pass. Grabbed the wrong file? The trash icon clears it.

The best part: a printed dimension is a measured number, so BidCraft trusts it above anything it would estimate from a photo. It still sits below your own voice notes and the manual corrections you type — so if you say the shower is 4 feet and the plan says 3, your word still wins.

Rooms name themselves now

Once BidCraft analyzes a room, it renames it from what the AI actually sees. "Room 1" becomes "Master Bathroom," "Room 2" becomes "Kitchen." No more squinting at a generic list trying to remember which room was which. If you uploaded a floor plan, the printed labels do the renaming too — a matched room picks up the exact label printed on the sheet.

And the important promise: a name you type by hand is never overwritten. Auto-naming only ever touches the generic "Room N" placeholders. Call it "the upstairs disaster bath" and it stays exactly that.

Where to look